Rope Climbing
When implemented in all mountaineering activities to implement the attachment rope or cable to secure items, you must consider how, in fact, lower the rope. The first is the easiest, but not safer, way – to throw it down. At Thus, even if the accompanying scream the words – not the fact that going from the bottom to hear, and if they hear – will have time to run away. The second, more logical, way – to give the rope across parts of the bend, being able to once again see the entire length of the rope. The third method is used in case of adverse weather conditions or the complexity of the object.
Getting better cableway from the thin rope or repshnura, which tacked on the end of a rope let down. The fourth method can be used in combination with the above methods. By the end of the rope to attach the load of 5-10kg in order to avoid sharp fluctuations. At the site where the rope dropped, we carry out the end of consolidation rope slightly tilted to avoid getting material on the rope. Now the next task is climbing. See how the rope passes. Through the bend between the mounting and descent of the rope should be under 90 to eliminate the possibility of chafing at the possibility of cross-shift under the weight. Consider a rope in the work area, ensure there are no kinks and sharp edges. If such items have a place to be, insure – setting the fuse to bend or to create additional procrastination. The purpose of mountaineering in the following ways lowering ropes, and determining the outcome of finding a rope – to protect climbing and passing down the people. If by some reason the security is not possible, then work should stop completely or to eliminate errors.